|
|
Maximulch
This
one pass soil loosener and stubble cultivator features 2
rows of spring mounted 560mm concave discs seperated by tines with our patented
TCS blades to create vertical fissuring whilst leaving a level
cultivated surface.
|
|
|
| |
 |
Whole
Profile Lifting
|
 |
| The
TCS blades are able to lift the whole soil profile vertically.
This vertical lifting takes less power than traditional winged
feet as soil is only moved vertically and there is no resistance
above the soil surface. |
|
| |
|
TCS
Blade Effect |
|
| The
Maximulch features our patented TCS Blades. This low disturbance
blade with its offset tip and wide foot, creates a bow wave
effect to lift the whole soil profile. Loosening the soil and
creating vertical fissures to improve its structure. |
|
| |
|
 |
| Easy Depth Adjustment |
 |
A rack and pinion system provides fast and easy depth adjustment of the legs across a wide working range and up to 30cm deep. The Machine stored handle attaches to the pinion allowing the leg to be wound up or down, before being secured in the desired position with a pin. This system is standard on both shear bolt and non-stop machines. |
| |
|
|
|
|
Shear
Bolt
|
Blade Security
|
Non-stop
|
 |
The
TCS blades can be supplied with shear bolt protection or non-stop
spring protection. Shear bolts provide a lower cost solution ideal
in less stoney conditions. For stoney conditions the non-stop spring system allows individual blades to break back and clear the obstacle before automatically resetting to their original position. Individually sprung blades ensure each tine is able to
apply its maximum force. |
 |
|
| |
|
3D
Disc Mounting System
Each disc
is mounted on a heavy duty pig tail tine, this allows movement
in all directions allowing obstacles to be avoided. This spring
system also stores energy delivering it back to the soil surface
for better penetration in tough working conditions. This action
causes the spring to vibrate providing better penetration.
|
|
 |
 |
 |
|
|
|
|
|
|
Individual
Disc Mounting
Each disc
is mounted using our patented 3D system, this allows each
disc unit to follow ground contours and avoid obstructions
without affecting the performance of the rest of the machine.
|
|
Obstruction
under one of the front discs
|
|
|
Obstruction
under one of the rear discs
|
|
|
|
 |
Hydraulic Folding Roller
As an option, the rear roller can be hydraulically folder for transport. Moving the weight of the roller forward dramatically reduces the load on the rear of the tractor making it more stable on the road. |
|
| |
| |
Bearing
Options
|
|
|
SR
Bearings
|
All Maximulch
machines are supplied as standard with our SR hub. The SR
hub is maintenance free and uses 80mm bearings and 4 bolt
(M16) disc mounting. As an option SRE hubs can be specified,
these are also maintenance free but utilise a 100mm bearing
and have the possibility of 8 bolt (M16) fixing. |
SRE
Bearings
|
 |
 |
|
| |
Rear
Rollers
|
|
|
V-Sem
|
Steel
Packer
|
Agrix
|
|
The
V-sem roller comprises angled press rings for consolidation,
between each press ring is a finger which not only prevents
blockage but also lightly presses the area between the roller
rings to give even consolidation aiding the establishment
of volunteers.
|
The
massive 700mm diameter steel packer roller has great clod
breaking abilities, it forces stones below the soil surface
and consolidates to depth.
|
The
Agrix rubber ring roller leaves a weatherproof finish Its
rubber constriction and scrapper bar ensure its clean running.
|
|
|
|
|
|
|
|
|
| |
| |
|
|
| |
