|
All
KRM salt spreaders are positively bristling with innovative features
to ensure the machine is simple to use, easy to set, gives an
accurate application rate and spread pattern and stands the test
of time.
|
|
Spreading
Mechanism
Four spreading
vanes distribute the material evenly, the vanes are manufactured
from manganese steel for increased wear resistance. Stainless
steel is used to produce all key parts of the spreader including
the disc, regulating mechanism and linkage to protect them from
the corrosive nature of salt and grit. All parts not stainless
are "flexi coat" powder painted, this paint finish is
thicker and 30 times more corrosion resistant than traditional
wet paint.
|
|
|
|
Heavy Duty
Agitator
The heavy
duty agitator ensures an even flow of material onto the disc.
This is achieved as the agitator not only extends up the hopper
but also keeps material in the hopper base moving and features
a replaceable knife to chop any lumps as they leave the hopper.
|
|
|
|
Easy Spread
Adjust
The spread
pattern can easily be adjusted to be central or biased to either
the left or right hand side of the machine, particularly useful
when spreading roadways.
|
|
Shroud / Skirt
The spread
width is quickly and easily adjusted by a single lever which alters
the position of the shroud. The spread width can be reduced right
down to the width of the machine approx. 1m by fitting a skirt
(supplied as standard) to the bottom of the shroud, ideal for
narrow paths and walkways.
|
|
|
Blockage prevention
All KRM salt
spreaders come fitted with top mounted screens as standard, these
prevent solid lumps of material and foreign objects from entering
the hopper, especially useful when spreading a material supplied
in bulk.
|