|
A
wide range of options are available to tailor your Bredal to your
requirements
|
|
Hopper Cover
To protect the
hopper contents a hopper cover can be supplied. Two types are available,
a roll over sheet and a hydraulically opening version as pictured.
The ability to open the cover simply by operating a spool in the
cab significantly reduces down time while loading.
|
|
|
|
Hopper Extension
All Bredal machines
can be fitted with a hopper extension to increase capacity. The
extensions give approximately 20% more capacity (depending on the
model) and can be manufactured as part of the hopper cover or as
a separate item.
|
|
|
|
Stainless Steel
As standard
key parts of all Bredal machines are manufactures from stainless
steel, these include; rear door, floor belt frame, lighting kit,
down shute, guarding etc. For the ultimate in easy cleaning and
long life a fully stainless steel hopper can be specified.
|
|
|
|
Hydraulic Belt
drive
The floor belt
can be driven hydraulically rather than with the cage wheel. This
can be a simple system to allow very high rates to be applied or
linked in to an in cab control box to facilitate on the move rate
adjustment and GPS variable rate spreading.
Learn
more here
|
|
|
|
Botex Crane
Fitting a crane
to the machines means one man can be fully self sufficient. This
system eliminates the need for a separate loader which can be inconvenient
to move around and costly to maintain. Many contractors find its
a quicker system to operate than using a front end loader, as the
machine is not constantly having to be constantly re-hitched. Loading
the machine in this way also means that the maximum load can always
be carried with less risk of spillage while loading for a neater
job.
A choice of
control systems is available.
|
|
|
|
|
|
|
|
Weight Transfer
A cylinder mounted
between a special frame on the front of the Bredal chassis and the
back of the tractor is pressurized through an accumulator. This
system significantly reduces bounce when traveling over rough ground
thus easing operator fatigue and improves traction in tough conditions.
|
|
|
Turf
Dresser
Our standard
turf dresser is based around the K40 machine, however any model
can be adapted for this purpose. All hydraulics are removed from
the machine by using PTO power to drive both the disc's and floor
belt. The disc's and vanes used are rubber coated for longer life.
|
|
|
Sand Conveyor
The sand conveyor
can be interchanged with the standard spinner box allowing the machine
to be utilized for a wider range of purposes.
|
|
|
|
|
|
|